How do I use the AyrMesh Receiver to bring my network into a building?

All you have to do is initialize the Receiver (connect it to your router for a few minutes), mount it on top of or on the side of your building, facing your AyrMesh Hub, and plug a device into the “LAN” port on the Receiver’s power supply. That device will now be part of your network. You can also connect an Ethernet Switch to the LAN port of the Receiver’s power supply and plug multiple Ethernet cables into it, to place several devices on the network. Finally, you can use an AyrMesh IndoorHub connected to the LAN Port on the Receiver's power supply (or to a port on a switch connected to the LAN port) to provide indoor WiFi.